IDE to SATA or SATA to IDE Adapter MM-BIR-IDE allows user to use SATA or IDE hard drive on most motherboards

IDE to SATA or SATA to IDE adapter MM-BIR-IDE is bi-direction converter for IDE and parallel ATA interface.

If you want to use an older IDE drive for a motherboard with SATA connector, or want to install a SATA drive to an older motherboard with IDE interface, this adapter is the perfect solution for you!

IDE to SATA or SATA to IDE adapter MM-BIR-IDE includes the serial ATA PHY, link, transport, and Parallel ATA (application layer) controller. The Serial ATA physical, link, and transport layer are compliant to Serial ATA 1.0. This converter supports a 1.5GHz data rate

Parallel and Serial ATA bi-directional converter features

* With LED indicated power
* Easy install & No driver Needed
* Serial ATA 1.0 Specification compliant
* Automatic Serial ATA 1.5 Gbps speed negotiation
* ATA/ATAPI PIO mode 0 to 4
* ATA/ATAPI Ultra DMA of transfer rate 16.7, 25 , 33, 48, 66, 100, 133,and 150MB/s
* ATA/ATAPI LBA48 addressing mode associated with 2-byte sector count
* Support Serial ATA hot-plug
* Ultra low power consumption
* Work for both AC and DC couple between the transmitter and the receiver
* Provide specified OOB signal detection and transmission
* Support Spread Spectrum Clocking to reduce EMI
* Support Partial / Slumber power management
* Provide adjustable TX signal amplitude and pre-emphasis level
* Slave support